Baytech MRP units 2012 Bedienungsanleitung PDF herunterladen (Seite 53)

Page53

TemperatureUnits(degreesC/F)

RPCCascadeMode

Menu 12: Network RPC Cascade Mode

CascadeModeEnable

CascadeModeStatusDisplay

CommandConfirmation

Enter Request :3

Command Confirmation is.......... Enabled

Enable ? (Y/N), CR for no change) :

Enter Request :2

RPC Outlet Status Display is..... Enabled

Enable ? (Y/N), CR for no change) :

Mode Menu

Cascade mode: Enabled

Outlet Status Display: Enabled

Command Confirmation: Enabled

Cascade Mode Enable..............1

Cascade Mode Status Display......2

Command Confirmation.............3

Select 2),enables this unit to display both the

Master/Slave outlets:

Select 3), enables the unit to ask for

confirmation before executing the command

Select 8), from the RPC Management Menu,

allow a user to connect to a non-Ethernet Baytech

power strip to control outlets of both units from

one menu.

Select 1), enables the Cascade feature

NOTE: Read the instruction carefully for the feature to operate properly.

RPC Cascade Mode is.............. Enable

Enabling this feature will allow access and management of a BayTech Remote

Power Device through the console (EIA-232) port via telnet/ssh/SNMP/http.

In RPC Cascade Mode, normal console port terminal service will operate only

when the network cable is disconnected.

When Cascade Mode is changed, URPC module will *RESET* upon acceptance of

configuration changes, at which time, cascade device should be connected

to or disconnected from the EIA-232 port as appropriate.

Enable ? (Y/N), CR for no change) :

urrent temperature reported in degrees Celsius.

Change to report in degrees Fahrenheit (Y/N): y

Converting temp min/max thresholds...done

urrent temperature reported in degrees Fahrenheit.

Change to report in degrees Celsius (Y/N): y

Converting temp min/max thresholds...done

Select 7), from the RPC

Management Menu, allows a user

to change the reported degrees in

Celsius or Fahrenheit

The unit display either of the

following:

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 66 67

Kommentare zu diesen Handbüchern

Keine Kommentare

Baytech MRP units 2012 Bedienungsanleitung Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Baytech MRP units 2012